Test Lab – Page 2

26th March 2015 · Luca Sturlese

Citrix PVS 7.6 Install – Part 7: Capturing the PVS Image

This is part 7 in the Citrix Provisioning Services 7.6 installation and configuration guide. In this article we be capturing the VM we have been working on so that we can create a new PVS image.

26th March 2015 · Luca Sturlese

Citrix PVS 7.6 Install – Part 6: Preparing for Image Capture

This is part 6 in the Citrix Provisioning Services 7.6 installation and configuration guide. In this article we look at installing the Citrix PVS Target Device software on the capture VM so that we can capture a new image.

26th March 2015 · Luca Sturlese

Citrix PVS 7.6 Install – Part 5: Group Policy for PVS Target Devices

This is part 5 in the Citrix Provisioning Services 7.6 installation and configuration guide. In this article we be configuring a new group policy object (GPO) that will need to be applied to all PVS target machines. Read More “Citrix PVS 7.6 Install – Part 5: Group Policy for PVS Target Devices” →

26th March 2015 · Luca Sturlese

Citrix PVS 7.6 Install – Part 4: Creating a Capture VM

This is part 4 in the Citrix Provisioning Services 7.6 installation and configuration guide. In this article we be creating and configuring the machine that will be used to capture the image we will be using to stream to the target devices.

26th March 2015 · Luca Sturlese

Citrix PVS 7.6 Install – Part 3: Configuring DHCP for Citrix PVS PXE

This is part 3 in the Citrix Provisioning Services 7.6 installation and configuration guide. In this article we look at how to configure a Microsoft DHCP server in order to get Citrix PVS PXE boot working.

26th March 2015 · Luca Sturlese

Citrix PVS 7.6 Install – Part 2: Configuring PVS Server

This is part 2 in the Citrix Provisioning Services 7.6 installation and configuration guide. In this article we be configuring the Citrix Provisioning Services server.

26th March 2015 · Luca Sturlese

Citrix PVS 7.6 Install – Part 1: Installing PVS Server

This is part 1 in the Citrix Provisioning Services 7.6 installation and configuration guide. In this article we install the PVS server on a Windows 2012 R2 box.

19th March 2015 · Luca Sturlese

Cisco SG300 – Configure DHCP Relay to allow DHCP server to support multiple subnets

By default DHCP works via broadcasting on the local subnet and therefore is limited to being able to provide IP addresses for devices on its subnet only. In modern day networks this is a serious limitation as it would mean that for every subnet you would need a DHCP server – imagine the management overhead!

So how can we configure a DHCP server in one subnet to respond and provide IP addresses to clients in multiple other subnets? The answer is to use a DHCP Relay Agent.

The following article explains how to configure a DHCP relay agent for a Cisco SG300 Layer 3 managed switch.

Tag: Test Lab